Inhibition effect of butan-1-ol on the corrosion behavior of austenitic stainless steel (Type 304) in dilute sulfuric acid

The electrochemical behavior of austenitic stainless steel (Type 304) in 3 M sulfuric acid with 3.5% recrystallized sodium chloride at specific concentrations of butan-1-ol was investigated with the aid of potentiodynamic polarization, open circuit measurement and weight loss technique. Butan-1-ol effectively inhibited the steel corrosion with a maximum inhibition efficiency of 78.7% from weight-loss analysis and 80.9% from potentiodynamic polarization test at highest concentration studied. Adsorption of the compound obeyed the Freundlich isotherm. Thermodynamic calculations reveal physiochemical interactions and spontaneous adsorption mechanism. Surface characterizations showed the absence of corrosion products and topographic modifications of the steel. Statistical analysis depicts the overwhelming influence and statistical significance of inhibitor concentration on the inhibition performance.     

Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Graphene oxide: a surfactant or particle?

Graphene oxide is a two-dimensional carbon nanomaterial that has risen to prominence over the last decade as graphenes water-dispersible counterpart. This key feature offers tremendous potential in the formation of waterborne hybrid materials, coatings, membranes and adsorbents that make use of its diverse surface chemistry and extraordinary surface area. However, the fundamental colloidal properties of graphene oxide remain incompletely understood, with conflicting reports on how the material's amphiphilic nature and adsorption at interfaces render it surfactant-like or particle-like in nature. In the present work, recent developments in understanding the bulk and interfacial colloidal properties of graphene oxide are explored in the context of its chemistry and system thermodynamics, giving insight into the fundamental question of whether its aqueous behaviour is most accurately described as particle-like, surfactant-like or indeed something entirely different.     

Thermal Activation of CH4 and H2 as Mediated by the Ruthenium Oxide Cluster Ions [RuOx]+ (x=1–3): On the Influence of Oxidation States

Thermal gas-phase reactions of the ruthenium-oxide clusters [RuO_x]⁺ (x=1–3) with methane and dihydrogen have been explored by using FT-ICR mass spectrometry complemented by high-level quantum chemical calculations. For methane activation, as compared to the previously studied [RuO]⁺/CH₄ couple, the higher oxidized Ru systems give rise to completely different product distributions. [RuO₂]⁺ brings about the generations of [Ru,O,C,H₂]⁺/H₂O, [Ru,O,C]⁺/H₂/H₂O, and [Ru,O,H₂]⁺/CH₂O, whereas [RuO₃]⁺ exhibits a higher selectivity and efficiency in producing formaldehyde and syngas (CO+H₂). Regarding the reactions with H₂, as compared to CH₄, both [RuO]⁺ and [RuO₂]⁺ react similarly inefficiently with oxygen-atom transfer being the main reaction channel; in contrast, [RuO₃]⁺ is inert toward dihydrogen. Theoretical analysis reveals that the reduction of the metal center drives the overall oxidation of methane, whereas the back-bonding orbital interactions between the cluster ions and dihydrogen control the H−H bond activation. Furthermore, the reactivity patterns of [RuO_x]⁺ (x=1–3) with CH₄ and H₂ have been compared with the previously reported results of Group 8 analogues [OsO_x]⁺/CH₄/H₂ (x=1–3) and the [FeO]⁺/H₂ system. The electronic origins for their distinctly different reaction behaviors have been addressed.     

Oxidative dehydrogenation of n-octane over a vanadium–magnesium oxide catalyst: Influence of the gas hourly space velocity

Oxidative dehydrogenation (ODH) of n-octane was carried out over a vanadium–magnesium oxide catalyst in a continuous flow fixed bed reactor. The catalyst was characterized by ICP–OES, powder XRD and SEM. The catalytic tests were carried out at different gas hourly space velocities (GHSVs), viz. 4000, 6000, 8000, and 10,000 h^?1. The best selectivity for octenes was obtained at the GHSV of 8000 h^?1, while that for C8 aromatics was attained at the GHSV of 6000 h^?1 at high temperatures (500 and 550 °C). The catalytic testing at the GHSV of 10,000 h^?1 showed the lowest activity, while that at the GHSV of 4000 h^?1 consistently showed the lowest ODH selectivity. Generally, the best ODH performance was obtained by the catalytic testing at the GHSVs of 6000 and 8000 h^?1. No phasic changes were observed after the catalytic testing.     

Synergistic Activities in the Ullmann Coupling of Chloroarenes at Ambient Temperature by Pd‐Supported Calcined Ferrocenated La2O3

Novel palladium‐doped nanoparticles have been explored to serve as the first metal oxide‐derived heterogeneous catalyst for Ullmann reaction of chloroarenes under mild condition (34 °C). This heterogeneous catalyst exhibited high catalytic activity towards the Ullmann homocoupling of chloroarenes into a series of useful symmetrically biaryl products with good to excellent yields in the presence of ethanol and NaOH, thereby leading to green and economical Ullmann reaction. The produced nanoparticles were successfully characterized by various techniques including PXRD, XPS, HRTEM, SEM‐EDS, BET, TGA techniques, elemental mapping analysis and ICP‐OES. Interestingly, based on characterization and experimental data, a reasonable mechanism has been proposed. Also, the formation of aryl methyl ketone as a by‐product has been further confirmed by isotopic labelling experiments that the acetyl moiety is derived from ethanol. Moreover, the catalyst was stable and could be easily reused up to 5 times under atmospheric air without suffering significant loss in catalytic activity.     

Chromium complexes based on thiophene–imine ligands for ethylene oligomerization

A new set of Cr(III) complexes, {L}CrCl₃(THF), based on thiophene–imine ( 2a , L = PhOC₆H₄(N═CH)‐2‐SC₄H₃; 2b , L = PhOC₂H₄(N═CH)‐2‐SC₄H₃; 2c , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₃; 2d , L = PhOC₆H₄(N═CH)‐2‐SC₄H₂‐5‐Ph; 2e , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₂‐5‐Ph) have been prepared and characterized using elemental analysis and infrared spectroscopy. Upon activation with methylaluminoxane, all the chromium complexes generated active systems affording a nonselective distribution of α‐olefins with turnover frequencies in the range 9500–93 500 (mol ethylene) (mol Cr)^?1 h^?1, and producing mostly oligomers (95.0–99.3 wt% of total products). Small amounts of polymer were produced in these oligomerization reactions (0.8–8.2 wt%). The catalytic activities were quite sensitive to the ligand environment. Moreover, the effects of oligomerization parameters (temperature, [Al]/[Cr] molar ratio, time) on the activity and on the product distribution were examined.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

单晶金刚石p型和n型掺杂的研究

超宽禁带半导体材料金刚石在热导率、载流子迁移率和击穿场强等方面表现出优异的性质,在功率电子学领域具有广阔的应用前景。实现p型和n型导电是制备金刚石半导体器件的基础要求,其中p型金刚石的发展较为成熟,主流的掺杂元素是硼,但在高掺杂时存在空穴迁移率迅速下降的问题;n型金刚石目前主流的掺杂元素是磷,还存在杂质能级深、电离能较大的问题,以及掺杂之后金刚石晶体中的缺陷造成载流子浓度和迁移率都比较低,电阻率难以达到器件的要求。因此制备高质量的p型和n型金刚石成为研究者关注的焦点。本文主要介绍金刚石独特的物理性质,概述化学气相沉积法和离子注入法实现金刚石掺杂的基本原理和参数指标,进而回顾两种方法进行单晶金刚石薄膜p型和n型掺杂的研究进展,系统总结了其面临的问题并对未来方向进行了展望。     

Highly sensitive perylene tetra-(alkoxycarbonyl) based colorimetric and ratiometric probes for fluorine detection

Fluoride anion (F^?) affects environmental, biological, and chemical processes significantly. Therefore, its detection has received increasing attention, and sensitive, effective, and convenient probes for F^? detection need to be developed urgently. In this work, two perylene tetra-(alkoxycarbonyl) (PTAC) based colorimetric and ratiometric probes, P1 and P2, were developed for the detection of F^?. The interactions between F^? and these two probes were investigated by absorption, electrochemistry, ¹H NMR, and density functional methods. Both the two probes were complexed with F^? with a ratio of 1:1. The detection limits of P1 and P2 were 0.22 μM and 0.87 μM, respectively. It was worth noting that the absorption peak of P1 showed a 190 nm red shift when sensing F^?, and P1 is the largest red shift value reported in F^? probes based on PTAC derivatives. This phenomenon was resulted from the unique configuration and deprotonation of P1 that can promote the intramolecular charge transfer (ICT). This strategy provides an example for the development of other ion probes based on D-A type ICT mechanism.